1.jpg
One component conductive silver adhesive

One component conductive silver adhesive
5.0/5 rating (3 votes)

ChemSpecial is a professional one component conductive silver adhesive manufacturer from China. This product is a one-component conductive silver adhesive, with excellent electrical conductivity. The conductive paths are formed by bonding the conductive particles with the matrix resin. Conductive silver adhesive is  easy to be operated, can increase production efficiency. Conductive silve adhesive can be used instead of lead-tin solder, to achieve conductive connection.

Specifications

  • Item

    Unit

    Standard

    Test method

    Appearance

     -

    silver paste

    visual inspection

    Viscosity

    Mpa·s(25℃)

    13000~15000

    GB/T 2794

    Set time

    hr(150℃)

    1

    GB/T 1728

    Thermal conductivity

    w/m·k

    2.5~3.0

    GB/T 3399

    Volume resistivity

    Ω·cm

    10-3~10-4

    Four-point probe

    Temperature range

    -55~+200

    comply with standard after three recycling

Attention

Drying time:
1h
fully cured at 150℃ (conductivity will be better under a pressure)

Handling Precautions:

1. Please operate according to our company's operating instructions.
2. Eating is forbidden, If gule sticked to the skin, please wash with soap promptly. If glue entered eyes, please clean with water, get treatment at hospital if necessary.

3. Operating place should keep ventilation.

Shelf life:
3 months (room temperature); 6month (0℃)

Package:
5g /piece, 10g/
piece, 100g/piece